Saline water: Difference between revisions
No edit summary Tag: Reverted |
Reverted good faith edits by 58.96.14.135 (talk): Unconstructive edit |
||
(40 intermediate revisions by 29 users not shown) | |||
Line 1: | Line 1: | ||
{{Short description|Water that contains a high concentration of dissolved salts}}{{redirect|Salt water|water in the oceans|Seawater|other uses}} |
{{Short description|Water that contains a high concentration of dissolved salts}} |
||
{{redirect|Salt water|water in the oceans|Seawater|other uses}} |
|||
{{ |
{{for multi|saline solution in medicine and life science|Saline (medicine)||Saline (disambiguation)}} |
||
{{Water salinity}} |
{{Water salinity}} |
||
'''Saline water''' (more commonly known as '''salt water''') is [[water]] |
'''Saline water''' (more commonly known as '''salt water''') is [[water]] that contains a high concentration of [[solvation|dissolved]] [[salt (chemistry)|salts]] (mainly [[sodium chloride]]). On the [[United States Geological Survey]] (USGS) [[salinity]] scale, saline water is saltier than [[brackish water]], but less salty than [[brine]]. The salt concentration is usually expressed in [[parts per thousand]] (permille, ‰) and [[parts per million]] (ppm). The USGS salinity scale defines three levels of saline water. The salt concentration in slightly saline water is 1,000 to 3,000 ppm (0.1–0.3%); in moderately saline water is 3,000 to 10,000 ppm (0.3–1%); and in highly saline water is 10,000 to 35,000 ppm (1–3.5%). [[Seawater]] has a salinity of roughly 35,000 ppm, equivalent to 35 grams of salt per one liter (or kilogram) of water. The saturation level is only nominally dependent on the temperature of the water.<ref>{{Cite web|date=c. 2004|title=Sodium Chloride MSDS|url=https://www.sigmaaldrich.com/catalog/product/sial/s7653?lang=en®ion=CA&cm_sp=Insite-_-caSrpResults_srpRecs_srpModel_sodium%20chloride-_-srpRecs3-1|website=Sigma Aldrich |url-status=dead |archive-url=https://web.archive.org/web/20210209190004/https://www.sigmaaldrich.com/catalog/product/sial/s7653?lang=en®ion=US&cm_sp=Insite-_-caSrpResults_srpRecs_srpModel_sodium%20chloride-_-srpRecs3-1 |archive-date=2021-02-09}}</ref> At {{Convert|20|C|F|abbr=|sp=us}} one liter of water can dissolve about 357 grams of salt, a concentration of 26.3 [[Mass fraction (chemistry)|percent by weight]] (% w/w). At {{Convert|100|C|F|abbr=|sp=us}} (the boiling temperature of pure water), the amount of salt that can be dissolved in one liter of water increases to about 391 grams, a concentration of 28.1% w/w. |
||
== Properties == |
== Properties == |
||
Line 11: | Line 12: | ||
|+ Properties of water-NaCl mixtures<ref>{{RubberBible86th|pages=8–71, 8–116}}</ref> |
|+ Properties of water-NaCl mixtures<ref>{{RubberBible86th|pages=8–71, 8–116}}</ref> |
||
|- |
|- |
||
!NaCl, wt% |
!NaCl, [[wt%]]!!Freezing point (°C)!! Freezing point (°F)!! [[Density]]<!--<ref group=note name=Temperature>At some ambient temperature (0°C).</ref>-->{{efn|At some ambient temperature}} (g/cm<sup>3</sup>)!! [[Refractive index]]{{efn|At some ambient temperature}} at 589 nm!![[Viscosity]]{{efn|At some ambient temperature (20°C)}} (cP ) |
||
|- |
|- |
||
|0|| 0|| 0.99984|| 1.3330|| 1.002 |
|0|| 0|| 32|| 0.99984|| 1.3330|| 1.002 |
||
|- |
|- |
||
|0.5|| −0.3|| 1.0018|| 1.3339|| 1.011 |
|0.5|| −0.3|| 31.46|| 1.0018|| 1.3339|| 1.011 |
||
|- |
|- |
||
|1|| −0.59|| 1.0053|| 1.3347|| 1.02 |
|1|| −0.59|| 30.94|| 1.0053|| 1.3347|| 1.02 |
||
|- |
|- |
||
|2|| −1.19|| 1.0125|| 1.3365|| 1.036 |
|2|| −1.19|| 29.86|| 1.0125|| 1.3365|| 1.036 |
||
|- |
|- |
||
|3|| −1.79|| 1.0196|| 1.3383|| 1.052 |
|3|| −1.79|| 28.78|| 1.0196|| 1.3383|| 1.052 |
||
|- |
|- |
||
|4|| −2.41|| 1.0268|| 1.3400|| 1.068 |
|4|| −2.41|| 27.66|| 1.0268|| 1.3400|| 1.068 |
||
|- |
|- |
||
|5|| −3.05|| 1.0340|| 1.3418|| 1.085 |
|5|| −3.05|| 26.51|| 1.0340|| 1.3418|| 1.085 |
||
|- |
|- |
||
|6|| −3.7|| 1.0413|| 1.3435|| 1.104 |
|6|| −3.7|| 25.34|| 1.0413|| 1.3435|| 1.104 |
||
|- |
|- |
||
|7|| −4.38|| 1.0486|| 1.3453|| 1.124 |
|7|| −4.38|| 24.12|| 1.0486|| 1.3453|| 1.124 |
||
|- |
|- |
||
|8|| −5.08|| 1.0559|| 1.3470|| 1.145 |
|8|| −5.08|| 22.86|| 1.0559|| 1.3470|| 1.145 |
||
|- |
|- |
||
|9|| −5.81|| 1.0633|| 1.3488|| 1.168 |
|9|| −5.81|| 21.54|| 1.0633|| 1.3488|| 1.168 |
||
|- |
|- |
||
|10|| −6.56|| 1.0707|| 1.3505|| 1.193 |
|10|| −6.56|| 20.19|| 1.0707|| 1.3505|| 1.193 |
||
|- |
|- |
||
|12|| −8.18|| 1.0857|| 1.3541|| 1.25 |
|12|| −8.18|| 17.28|| 1.0857|| 1.3541|| 1.25 |
||
|- |
|- |
||
|14|| −9.94|| 1.1008|| 1.3576|| 1.317 |
|14|| −9.94|| 14.11|| 1.1008|| 1.3576|| 1.317 |
||
|- |
|- |
||
|16|| −11.89|| 1.1162|| 1.3612|| 1.388 |
|16|| −11.89|| 10.60|| 1.1162|| 1.3612|| 1.388 |
||
|- |
|- |
||
|18|| −14.04|| 1.1319|| 1.3648|| 1.463 |
|18|| −14.04|| 6.73|| 1.1319|| 1.3648|| 1.463 |
||
|- |
|- |
||
|20|| −16.46|| 1.1478|| 1.3684|| 1.557 |
|20|| −16.46|| 2.37|| 1.1478|| 1.3684|| 1.557 |
||
|- |
|- |
||
|{{efn|Eutectic mixture}}23.3|| −21.1|| 1.179|| || |
|{{efn|[[Eutectic mixture]]}}23.3|| −21.1|| −5.98|| 1.179|| || |
||
|- |
|- |
||
|26|| −19.18|| 1.193|| 1. |
|26|| −19.18|| −2.52|| 1.193|| 1.3795|| 1.676 |
||
|} |
|} |
||
{{notelist}} |
{{notelist}} |
||
<!--{{Reflist|group=note}}--> |
<!--{{Reflist|group=note}}--> |
||
At 100 |
At {{Convert|100|C|F K|abbr=|sp=us}}, saturated sodium chloride brine is about 28% [[salt]] by weight. At {{Convert|0|C|F K|abbr=|sp=us}}, brine can only hold about 26% salt.<ref>CRC Handbook of Chemistry and Physics, 63rd Edition 1982-1983.</ref> At 20 °C one liter of water can dissolve about 357 grams of salt, a concentration of 26.3%.<ref>{{Cite web|url=https://www.chem.wisc.edu/deptfiles/genchem/sstutorial/Text11/Tx112/tx112.html|title=Solubility|website=University of Wisconsin Fundamentals of Chemistry|url-status=live|archive-url=https://web.archive.org/web/20160331150210/https://www.chem.wisc.edu/deptfiles/genchem/sstutorial/Text11/Tx112/tx112.html|archive-date=31 March 2016|access-date=6 November 2014}}</ref> |
||
The [[thermal conductivity]] of [[seawater]] (3.5% dissolved salt by weight) is 0.6 W/mK at 25 |
The [[thermal conductivity]] of [[seawater]] (3.5% dissolved salt by weight) is 0.6 W/mK at {{Convert|25|C|F|abbr=|sp=us}}.<ref>[http://web.mit.edu/lienhard/www/Thermophysical_properties_of_seawater-DWT-16-354-2010.pdf Thermophysical properties of seawater: a review of existing correlations and data] Paper published in April 2010 on ''web.mit.edu''. Retrieved 2021-03-11.</ref> The thermal conductivity decreases with increasing salinity and increases with increasing temperature. |
||
<ref>https://handbook.ashrae.org/Handbooks/F17/SI/F17_Ch31/figures/F31sf08.jpg Plots of thermal conductivity vs. temperature for 0, 5, ... 25 w/w NaCl/water solutions. Retrieved 2020-11-27.</ref> |
<ref>https://handbook.ashrae.org/Handbooks/F17/SI/F17_Ch31/figures/F31sf08.jpg Plots of thermal conductivity vs. temperature for 0, 5, ... 25 w/w NaCl/water solutions. Retrieved 2020-11-27.</ref> |
||
<ref>{{Cite web|url=http://twt.mpei.ac.ru/tthb/2/Tab-5-5-13-2-Ther-Cond-Seawater.html|title=Thermal conductivity of seawater and its concentrates|website=twt.mpei.ac.ru|access-date=2018-02-16}}</ref> |
<ref>{{Cite web|url=http://twt.mpei.ac.ru/tthb/2/Tab-5-5-13-2-Ther-Cond-Seawater.html|title=Thermal conductivity of seawater and its concentrates|website=twt.mpei.ac.ru|access-date=2018-02-16}}</ref> |
||
The salt content can be determined with a [[salinometer]]. |
The salt content can be determined with a [[salinometer]]. |
||
[[Density]] ''ρ'' of brine at various [[concentration]]s and temperatures from 200 |
[[Density]] ''ρ'' of brine at various [[concentration]]s and temperatures from {{Convert|200 to 575|C|F|abbr=|sp=us}} can be approximated with a linear equation:<ref>{{cite journal |last=Dittman |first=Gerald L. |date=February 16, 1977 |title=Calculation of Brine Properties. |location=Livermore CA |journal= Lawrence Livermore Laboratories |doi=10.2172/7111583 |url=http://www.osti.gov/bridge/servlets/purl/7111583-l9lvkU/native/7111583.pd }}</ref> |
||
<math>\rho [lb/ft^3]= a_3 - (a_2 \cdot T[F])</math> |
<math>\rho [lb/ft^3]= a_3 - (a_2 \cdot T[F])</math> |
Latest revision as of 13:43, 30 April 2024
Part of a series on |
Water salinity |
---|
Salinity levels |
Fresh water (< 0.05%) Brackish water (0.05–3%) Saline water (3–5%) Brine (> 5% up to 26%–28% max) |
Bodies of water |
Saline water (more commonly known as salt water) is water that contains a high concentration of dissolved salts (mainly sodium chloride). On the United States Geological Survey (USGS) salinity scale, saline water is saltier than brackish water, but less salty than brine. The salt concentration is usually expressed in parts per thousand (permille, ‰) and parts per million (ppm). The USGS salinity scale defines three levels of saline water. The salt concentration in slightly saline water is 1,000 to 3,000 ppm (0.1–0.3%); in moderately saline water is 3,000 to 10,000 ppm (0.3–1%); and in highly saline water is 10,000 to 35,000 ppm (1–3.5%). Seawater has a salinity of roughly 35,000 ppm, equivalent to 35 grams of salt per one liter (or kilogram) of water. The saturation level is only nominally dependent on the temperature of the water.[1] At 20 °C (68 °F) one liter of water can dissolve about 357 grams of salt, a concentration of 26.3 percent by weight (% w/w). At 100 °C (212 °F) (the boiling temperature of pure water), the amount of salt that can be dissolved in one liter of water increases to about 391 grams, a concentration of 28.1% w/w.
Properties[edit]
NaCl, wt% | Freezing point (°C) | Freezing point (°F) | Density[a] (g/cm3) | Refractive index[b] at 589 nm | Viscosity[c] (cP ) |
---|---|---|---|---|---|
0 | 0 | 32 | 0.99984 | 1.3330 | 1.002 |
0.5 | −0.3 | 31.46 | 1.0018 | 1.3339 | 1.011 |
1 | −0.59 | 30.94 | 1.0053 | 1.3347 | 1.02 |
2 | −1.19 | 29.86 | 1.0125 | 1.3365 | 1.036 |
3 | −1.79 | 28.78 | 1.0196 | 1.3383 | 1.052 |
4 | −2.41 | 27.66 | 1.0268 | 1.3400 | 1.068 |
5 | −3.05 | 26.51 | 1.0340 | 1.3418 | 1.085 |
6 | −3.7 | 25.34 | 1.0413 | 1.3435 | 1.104 |
7 | −4.38 | 24.12 | 1.0486 | 1.3453 | 1.124 |
8 | −5.08 | 22.86 | 1.0559 | 1.3470 | 1.145 |
9 | −5.81 | 21.54 | 1.0633 | 1.3488 | 1.168 |
10 | −6.56 | 20.19 | 1.0707 | 1.3505 | 1.193 |
12 | −8.18 | 17.28 | 1.0857 | 1.3541 | 1.25 |
14 | −9.94 | 14.11 | 1.1008 | 1.3576 | 1.317 |
16 | −11.89 | 10.60 | 1.1162 | 1.3612 | 1.388 |
18 | −14.04 | 6.73 | 1.1319 | 1.3648 | 1.463 |
20 | −16.46 | 2.37 | 1.1478 | 1.3684 | 1.557 |
[d]23.3 | −21.1 | −5.98 | 1.179 | ||
26 | −19.18 | −2.52 | 1.193 | 1.3795 | 1.676 |
- ^ At some ambient temperature
- ^ At some ambient temperature
- ^ At some ambient temperature (20°C)
- ^ Eutectic mixture
At 100 °C (212 °F; 373 K), saturated sodium chloride brine is about 28% salt by weight. At 0 °C (32 °F; 273 K), brine can only hold about 26% salt.[3] At 20 °C one liter of water can dissolve about 357 grams of salt, a concentration of 26.3%.[4]
The thermal conductivity of seawater (3.5% dissolved salt by weight) is 0.6 W/mK at 25 °C (77 °F).[5] The thermal conductivity decreases with increasing salinity and increases with increasing temperature. [6] [7] The salt content can be determined with a salinometer.
Density ρ of brine at various concentrations and temperatures from 200 to 575 °C (392 to 1,067 °F) can be approximated with a linear equation:[8]
where the values of an are:
Weight % | a2 | a3 |
---|---|---|
5 | 0.043 | 72.60 |
10 | 0.039 | 73.72 |
15 | 0.035 | 74.86 |
20 | 0.032 | 76.21 |
25 | 0.030 | 77.85 |
Electrolysis[edit]
About four percent of hydrogen gas produced worldwide is created by electrolysis. The majority of this hydrogen produced through electrolysis is a side product in the production of chlorine.
- 2 NaCl(aq) + 2 H2O(l) → 2 NaOH(aq) + H2(g) + Cl2(g)
See also[edit]
References[edit]
- ^ "Sodium Chloride MSDS". Sigma Aldrich. c. 2004. Archived from the original on 2021-02-09.
- ^ Lide, D. R., ed. (2005). CRC Handbook of Chemistry and Physics (86th ed.). Boca Raton (FL): CRC Press. pp. 8–71, 8–116. ISBN 0-8493-0486-5.
- ^ CRC Handbook of Chemistry and Physics, 63rd Edition 1982-1983.
- ^ "Solubility". University of Wisconsin Fundamentals of Chemistry. Archived from the original on 31 March 2016. Retrieved 6 November 2014.
- ^ Thermophysical properties of seawater: a review of existing correlations and data Paper published in April 2010 on web.mit.edu. Retrieved 2021-03-11.
- ^ https://handbook.ashrae.org/Handbooks/F17/SI/F17_Ch31/figures/F31sf08.jpg Plots of thermal conductivity vs. temperature for 0, 5, ... 25 w/w NaCl/water solutions. Retrieved 2020-11-27.
- ^ "Thermal conductivity of seawater and its concentrates". twt.mpei.ac.ru. Retrieved 2018-02-16.
- ^ Dittman, Gerald L. (February 16, 1977). "Calculation of Brine Properties". Lawrence Livermore Laboratories. Livermore CA. doi:10.2172/7111583.
External links[edit]
Media related to Saline water at Wikimedia Commons